Procedures

Basic Procedures in Short

Preparation of implant support overdenture framework from Dentapreg^TM Implant always involves several basic procedures repeated in all particular clinical situations:

Click on required picture for 3D view

1. Implant model		2. Dentapreg™ adaptation 1st post		3. Light curing
4. Dentapreg™ adaptation 2nd post		5. Dentapreg™ adaptation 4th post		6. Dentapreg™ adaptation 3rd post
7. Dentapreg™ ending		8. Filling the gaps between the strip and post with flow composite		9. Light curing of the flow composite
10. Finalized FRC framework

General Remarks for Working with Dentapreg™

• Dental stone model is a good training tool for trials of Dentapreg™
• Avoid sharp edges and undercuts on the model
• Before forming Dentapreg™ strip on a model, always apply separation liquid or wax
• Always use the widest clinically acceptable Dentapreg™ strip
• In order to minimize potential damage to the fibers, it is recommended to use plastic instruments for dental filling composites
• When preparing the strip (measuring, trimming), keep the strip in its original transparent protection foil to avoid contamination