Instructions of Use

Denture Repair

Repair of mandible or maxilla broken denture with Dentapreg™ UFM involves several basic procedures repeated in all situations:

Click on the picture for 3D view

Broken denture
1. Fractured denture 2. Stick together the broken parts of denture 3. Prepare the gypsum pad
4. Grind the edges of both parts of denture 5. Cut the canal(s) 6.Measure the required length of Dentapreg™ Repair strip
7. Place a layer of denture base resin to the canal(s) 8. Cut and place the Dentapreg™ UFM strip 9. Light cure Dentapreg™ UFM strip(s)
10. Cover the cured strips with denture base resin 11. Polymerize the repaired denture and then polish it
 12. Repaired denture

Large Restoration

Fabricating large restorations of the teeth with Dentapreg™ UFM always involves several basic procedures repeated in all particular clinical situations:

Click on the picture for 3D view

1. Build the tooth usual way 2. Apply thin layer of flow composite 3. Insert Dentapreg™ UFM strip of required length to flow composite
4. Light cure Dentapreg™ UFM strip 5. Cover DentapregTM UFM strip with C&B composite 6. Tooth reinforced with Dentapreg™ UFM strip

General Remarks for Working with Dentapreg™ UFM

  • Dental stone model is a good training tool for trials of  Dentapreg™ UFM
  • Avoid sharp edges and undercuts on the model
  • Before forming Dentapreg™ UFM strip on a model, always apply separation liquid or wax
  • Always use the widest clinically acceptable Dentapreg™ UFM strip
  • During forming and adaptation of the Dentapreg™ UFM strip advance slowly from one end to the other to allow for a good adaptation of the fibrous reinforcement and small flow of the resin to avoid defects and shape memory effect
  • In order to minimize potential damage to the fibers, it is recommended to use plastic instruments used to work with dental filling composites
  • When preparing the strip (measuring, trimming), keep the strip in its original transparent protection foil to avoid contamination
  • Avoid sharp edges and extremely small interproximal curvatures when forming Dentapreg™ UFM strips to prevent fiber breakage


top 


  • International
  • Products
  • Dentapreg UFM
  • Instructions of Use
  • Instructions of Use