Basic Procedures in Short

Repair of maxilla broken denture with Dentapreg™ strip always includes several basic procedures repeated in all situations:

 

 

1. Fractured removable denture

 

2. Stick together broken parts of denture with wax

 
3. Prepare the gypsum pad  

4. Grind the edges of both parts of denture

 

5. Cut the canal(s)

 

6.Measure the length of Dentapreg™ Repair strip to the canal(s)

 

7. Cut and place the Dentapreg™ Repair strip

 

8. Light cure Dentapreg™ Repair strip(s)

 

9. Remove cured strip(s) and apply denture base resin to the canal(s)

 

10. Insert cured strips to the canal(s) and cover them with denture base resin

 
11. Polymerize the repaired denture
  

12. Polish the repaired denture



General Remarks for Working with Dentapreg™

  • Always use the widest clinically acceptable DentapregTM strip
  • To minimize potential damage to the fibers, is rocemmended to use plastic instruments used to work with dental filling composites
  • When preparing the strip (measuring, trimming), keep the strip in it's original transparent protection foil to avoid contamination
  • Avoid sharp edges and extremely small interproximal curvatures when forming DentapregTM strips to prevent fiber breakage

 


Fractured removable denture
Stick together broken parts of denture with wax
Prepare the gypsum pad
Gring the edges of both parts of denture
Cut the canal(s)
Measure the length of Dentapreg Repair strip to the canal(s)
Cut and place the Dentapreg Repair strip
Light cure the Dentapreg Repair strip(s)
Remove cured strip(s) and apply denture base resin to the canal(s)
Insert cured strips to the canal(s) and cover them with denture base resin
Polymerize the repaired denture
Polish the repaired denture

top 


  • English
  • Doctors and Technicians
  • Laboratory
  • Removable Dentures
  • Procedures
  • Basic Procedures in Short